Frontend - Productfinder: v1.1.8
Frontend - Configurator: v1.0.16
Frontend - Configurations: v2.0.1
API - Productfinder: v1.1.19
API - Interfaces: v1.0.12
API - Main: v1.0.11
API - Configurations: v1.1.2
Configurator: v1.10.10
紧凑泵站、标准液压泵站和加装阀可供选择。
液压泵站
HAWE Hydraulik 液压泵以其紧凑坚固的结构而出众。它们适用于低压、中压和高压，压力最高可达 1500 bar。
单泵（径向柱塞泵、轴向柱塞泵、气动操纵液压泵、手动泵）和泵元件均可供选择。这些设备可以单独提供，也可以作为紧凑型机组或标准型机组添加到液压泵站中。
泵
换向阀、截止式换向阀、压力阀、流量阀和截止阀均可供选择 — 可作为单个部件，或者组合在阀组中。
阀
连接板是液压泵站和液压控制系统之间的连接部件。此处所述的连接板适用于与 HAWE 紧凑泵站组合。
Manifolds, valve banks
集成解决方案将各种功能或模块整合到一个系统中。其设计和优化可实现各部件之间无缝协作和数据传输。集成解决方案是根据广泛的模块化部件系统所定制，交付后即可安装。其用于各种行业和机器类型。
综合解决方案
哈威液压 (HAWE Hydraulik) 提供与我们的液压组件相匹配的附加电子组件。此外还包括移动控制器，用以调控复杂的液压系统。
电子控制器、比例放大器和接线盒均可供选择。
电子
电池组或可充电电池组由多个并联或串联的电池模块组成。它们作为电能的通用蓄能器。电池组可以并联扩展形成电池系统，以实现机器的预期范围。
Battery and Battery Management
液压夹紧缸在活塞上产生与压力相关的拉力。 当无压时夹紧活塞回到起始位置。
轴向柱塞电机是定量电机。 它的排量恒定，并且因此取决于体积流量而产生固定转速。
液压缸
对于液压配件，有多种不同的连接部件以供选择，借助这些连接件，液压设备可在不同的加装位置连接到 HAWE 液压泵站和阀的压力管路上。
附件
For downloading configuration software, support files and documentation for HAWE electronic products.
HAWE Software
Programmable logic valve controls control and regulate complex mobile or stationary hydraulic systems.
Controller
Valves with integrated electronics are characterised by outstanding reliability, low hysteresis, reproducibility and high IP protection. With preset parameter sets, you are sure to get a valve that is perfectly matched to your application.
Valves with on-board electronics
Proportional amplifiers actuate proportional solenoid valves by converting an input signal into a corresponding control current.
Amplifiers for proportional solenoids
Electronic pressure transducers operate according to the principle of strain gauges connected in a full bridge.
The sensor elements are manufactured using thin-film technology and are temperature-compensated. The measuring signal is amplified and converted by analogue electronics.
Thanks to the high level of long-term stability and the EMC properties, they guarantee reliable signal detection under adverse ambient conditions.
Pressure switch
HAWE Mattro specialises in the electrification of mobile machinery. Here you will find the support files and documents for battery systems and robot platforms.
Battery and Components
Mobile robot platforms consist of a driverless transport system and installed function modules. This enables them to adapt flexibly on a changing succession of tasks and places of work. Thanks to modern hardware and software components, these platforms can be controlled remotely or by internal programming when performing their work.
Vehicles Mattro
Compact hydraulic power packs are a type of hydraulic power pack. They are characterised by a highly compact design, since the motor shaft of the electric motor also acts as the pump shaft. Compact hydraulic power packs are used to supply hydraulic oil in hydraulic systems.
Compact hydraulic power packs
PC software for the parametrisation and diagnostics.
Service Software
PC software for programming and developing applications for HAWE electronics.
Development Environment
For connecting PC to HAWE electronics.
Accessories